Once the barcodes, also known as QR Codes, are in place they are ready for scanning and reporting. Most devices include a barcode scanner on the camera by default, but if not, any “Barcode” or “QR Code” reader app will
After the Locations have been loaded into the system, they are ready to be printed and placed around the facility. Once the QR Codes, often referred to as barcodes, are in place they are ready for conducting checks. Many devices
Once you have loaded your locations into the system, you will need a barcode, or QR code, to scan. Luckily, this is one of the easiest parts. After loading the locations, or adding them one by one, the barcode/QR code
Sometimes the Tasks needed for a particular Architectural ID, or Area, change. Sometimes there is a typo. There is a way to make changes to individual Locations after they are in the system. NOTE: This does not change the Tasks
Before you can start tracking, collecting and reporting on anything, you have to get some locations into the system. Standard User accounts do not have access to create Location. If you do not see “Add 1 New Location” or “Bulk
There are times that you will want to remove a Location from rotation. Maybe it is an area that is no longer needing the attention. Maybe it is no longer used. Maybe the Location was accidental. There are a number
HWM – Admin – Reporting This report is available by expanding the “HWM – Admin” section and clicking “Reporting”, then clicking the “Daily” button. HWM – Admin – Reporting – Daily Here you can see the details of the Locations
HWM – Admin – Reporting This report is available by expanding the “HWM – Admin” section and clicking “Reporting” The first page that loads is for “Today” The far right of the report navigation bar allows the user to “Choose
The navigation bar will appear on the left side when on a PC or Mac, and on the right side when on a mobile device. On mobile, you may see a hamburger menu to expand the navigation: Depending on your
Hazardous Waste Management, known as HWM, is real-time tracking and reporting of the hazardous waste checks that occur in the locations around your facility. Check the status of a location in the facility to see when it was last checked,
