Patient Visit Assessments, known as PVA, is real-time assessments of Patient Visit Assessments and Discharge Room Assessments from around the facility. See a history of a room, or location, in the facility to see how it has fared over time. See an image of the last time an Assessment was completed. Monitor for Assessments for …
After the Locations have been loaded into the system, they are ready to be printed and placed around the facility. Once the QR Codes, often referred to as barcodes, are in place they are ready for conducting assessments. Many devices include a QR Code scanner on the camera, but if not, any “Barcode” or “QR …
Before you can start conducting Patient Visit or Discharge Room Assessment or reporting on anything, you have to get some Locations into the system. There are three ways to add Locations. You can add them one at a time, you can use the Visit Type List, or you can load 200 Locations in one fell …
After a Location has been added for a Patient Visit Assessment it may be necessary to make changes to the questions, spelling, name or just add a note. This is the process for editing the Location Name, editing, removing, or adding associated Patient Visit (PV) Questions, Discharge Room (DR) Questions, or optional notes or comments.
The most common way to get to the “MRC User Reporting” is to click on the “Check By” value within another report. Including the “Scan List” page.
The most common way to get to the “MRC Architectural Number Reporting” is to click on the “Architectural #” value within another report.
The most common way to get to the “MRC Zone Reporting” is to click on the “Zone” value within another report.
Even if the Zone is showing as “unclassified” (the default if no Zone is provided), clicking it will get you into the report and you can change the Zone, outlined below.
There are a number of ways to get to the MRC Reporting by Day, or Date Range.
Some of the most common are as follows:
- Clicking “Todays Report” from the navigation bar
- Clicking “Last 7 Days”, or variation of Last # Days, from the navigation bar
- Clicking a date, or date and timestamp, from different reporting tables
This report is available by expanding the “eQA – Admin” section and clicking “Reporting”, then clicking the “Employee” button.
This report is available by expanding the “eQA – Admin” section and clicking “Reporting”, then clicking the “Manager” button.